0.18%炭素鋼の(α+γ)2相域からの加熱時におけるα→γ変態挙動

抄録

α→γ transformation behavior during continuous heating at a rate of 3K/s from the (α+γ) region in 0.18% carbon steel has been investigated by dilatometric measurement and metallography.
The transformation was delayed with increasing an initial amount of proeutectoid α before the heating. When the amount of proeutectoid α before the heating was same, the transformation kinetics was delayed with increases in initial γ grain size and in the γ→α transformation temperature in the (α+γ) region. Microscopic observation showed that the α→γ transformation proceeded only by the growth of pre-existing γ, namely the dissolution of proeutectoid α, without nucleation of new γ grains in the proeutectoid α particles. When the temperature (T_0.9) for 90% γ in the α→γ transformation was plotted against the size of α particles before the heating, the experimental data lay on a straight line and T_0.9 increased with increasing the α particle size, regardless of various factors such as the initial γ grain size, the γ→α transformation temperature, and the amount of proeutectoid α. The effect of the various factors on the α→γ transformation behavior could be well explained by considering the influence of those factors on the size of proeutectoid α particles.