TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
Online ISSN : 2189-4205
Print ISSN : 0549-3811
ISSN-L : 0549-3811
 
MEMS-Based Solid Propellant Rocket Array Thruster
Shuji Tanaka, Ryuichiro Hosokawa, Shin-ichiro Tokudome, Keiichi Hori, Hirobumi Saito, Masashi Watanabe, Masayoshi Esashi
著者情報
ジャーナル フリー

2003 年 46 巻 151 号 p. 47-51

詳細
抄録
The prototype of a solid propellant rocket array thruster for simple attitude control of a 10 kg class micro-spacecraft was completed and tested. The prototype has 10×10 φ0.8 mm solid propellant micro-rockets arrayed at a pitch of 1.2 mm on a 20×22 mm substrate. To realize such a dense array of micro-rockets, each ignition heater is powered from the backside of the thruster through an electrical feedthrough which passes along a propellant cylinder wall. Boron/potassium nitrate propellant (NAB) is used with/without lead rhodanide/potassium chlorate/nitrocellulose ignition aid (RK). Impulse thrust was measured by a pendulum method in air. Ignition required electric power of at least 3–4 W with RK and 4–6 W without RK. Measured impulse thrusts were from 2×10−5 Ns to 3×10−4 Ns after the calculation of compensation for air dumping.
著者関連情報
© 2003 The Japan Society for Aeronautical and Space Sciences
前の記事 次の記事
feedback
Top