IEICE Transactions on Communications
Online ISSN : 1745-1345
Print ISSN : 0916-8516

This article has now been updated. Please use the final version.

Modeling of Transfer Impedance in Automotive BCI Test System with Closed-loop Method
Junesang LeeHosang LeeJungrae HaMinho KimSangwon YunYeongsik KimWansoo Nah
Author information
JOURNAL RESTRICTED ACCESS Advance online publication

Article ID: 2019EBP3144

Details
Abstract

This paper presents a methodology with which to construct an equivalent simulation model of closed-loop BCI testing for a vehicle component. The proposed model comprehensively takes the transfer impedance of the test configuration into account. The methodology used in this paper relies on circuit modeling and EM modeling as well. The BCI test probes are modeled as the equivalent circuits, and the frequency-dependent losses characteristics in the probe's ferrite are derived using a PSO algorithm. The measurement environments involving the harness cable, load simulator, DUT, and ground plane are designed through three-dimensional EM simulation. The developed circuit model and EM model are completely integrated in a commercial EM simulation tool, EMC Studio of EMCoS Ltd. The simulated results are validated through comparison with measurements. The simulated and measurement results are consistent in the range of 1MHz up to 400 MHz.

Content from these authors
© 2019 The Institute of Electronics, Information and Communication Engineers
feedback
Top