Design of Ultra-thin Wave Absorber with Square Patch Array Considering Electromagnetic Coupling between Patch Array and Back-Metal

抄録

In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1 mm, sheet resistance of less than 20 Ω/sq. and patch width of more than 15 mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.