日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

多層カーボンナノチューブにおける軸方向線膨張係数の温度依存性に関する研究(配向カーボンナノチューブ/エポキシ複合材料の線膨張測定に基づく手法)
白須 圭一中村 彰宏山本 剛小笠原 俊夫島村 佳伸井上 翼橋田 俊之
著者情報
ジャーナル フリー 早期公開

論文ID: 16-00228

この記事には本公開記事があります。
詳細
抄録

In this study, to evaluate the temperature dependence of the coefficient of thermal expansion (CTE) of multi-walled carbon nanotubes (MWCNTs) in the axial direction, the CTEs of aligned MWCNT reinforced epoxy composites are measured, and the axial CTEs of the MWCNTs are computed using the rule of mixtures. The mean diameters of the MWCNTs used in this study are 25 nm and 41 nm. The composite samples whose length is along the direction in parallel to MWCNT alignment are heated using a hot plate, and the length change is measured by a laser displacement meter. We demonstrate that the thermal contraction is observed in the composites, i.e. the CTEs of the composites are negative. The axial CTEs of both MWCNTs are calculated to be negative in the temperature range from -5‒85°C, and they tend to increase with the increasing temperature. The MWCNTs with the mean diameter of 41 nm possess larger negative CTE in the above temperature range compared with the MWCNTs with the mean diameter of 25 nm. The CTEs of the MWCNTs with the mean diameter of 25 nm and 41 nm are -1.1 ‒ 0.1×10-5 K-1 and -1.9 ‒ -0.8×10-5 K-1, respectively. These values are in reasonable agreement with those of the CNTs reported previously. The negative CTEs may be explained by out-of-plane atomic vibrations predicted by theoretical and numerical studies.

著者関連情報
© 2016 一般社団法人日本機械学会
feedback
Top