ばね論文集
Online ISSN : 1348-1479
Print ISSN : 0385-6917
ISSN-L : 0385-6917
論文
レーザエッチングによるステンレス鋼の表面テクスチャリング
堀口 禎行新堀 凌士大沢 基明
著者情報
ジャーナル フリー

2021 年 2021 巻 66 号 p. 23-28

詳細
抄録

This study examined surface texture engraved by laser irradiation in sulfuric acid solution. The Laser irradiation accelerates local corrosion in acid solution, and forms groove pattern. This process is called “Laser etching”. It shall be noted that the simple application of laser etching can merely create an entire surface corrosion. By applying passive potential, the groove depth of corrosion by laser irradiation became deeper than natural potential and area which was not irradiated by laser did not corrode. The groove depth of corrosion increased with increasing laser power and increasing scanning number of laser irradiation in 100 and 200 μm beam diameter. The groove width of corrosion decreased with increasing scanning speed of laser beam. Under the same laser power, groove width of corrosion by laser irradiation was approximately constant, but groove width of corrosion by laser in 100 μm beam diameter was smaller than 200 μm beam diameter under optimum laser power condition. From these results, tapered groove and multi grooves of corrosion can be formed by laser etching.

著者関連情報
© 2021 日本ばね学会
前の記事 次の記事
feedback
Top