2016 Volume 39 Issue 6 Pages 898-902
The gas phase of cigarette smoke is important from the viewpoint of human health, because it can pass through alveolar epithelium and enter the circulation. There is no standard method for the preparation of a gas phase extract of cigarette smoke (CSE), although CSE is widely used for research instead of whole cigarette smoke. We have established a standard method for the preparation of CSE. One cigarette per trial is continuously combusted under a reduced pressure generated by an aspiration pump with a velocity of 1.050 L/min: the main stream of the smoke is passed through a Cambridge filter to remove tar, and subsequently, bubbled through a glass ball filter (pore size, 20–30 µm) into 15 mL of phosphate-buffered saline (PBS). To express the concentration of CSE, a virtual tar concentration is introduced, which is calculated assuming that tar trapped on the Cambridge filter is dissolved in the PBS. CSEs prepared from smaller numbers of cigarettes (original virtual tar concentration≤15 mg/mL) show similar concentration–response curves for cytotoxicity versus virtual tar concentrations. CSEs prepared from various brands of cigarettes and by different smoking regimes (continuous and puff smoking) show similar cytotoxic potency if the virtual tar concentrations are the same. In conclusion, using the standardized method for CSE preparation in combination with the virtual tar concentration, it becomes possible to simply and rapidly prepare standard CSEs with defined concentrations from any brand of cigarettes, which are toxicologically equivalent to CSE prepared by puff smoking.
