Optimization of the Hydrothermal Activation Treatment with Sodium Hydroxide Solution for the Conversion of Coal Fly Ash to Zeolite and Its Adsorption Capability of Lead (II) Ions from the Liquid Phase

Abstract

Coal fly ash (FA) was treated by hydrothermal activation with sodium hydroxide solution at different concentrations to optimize the conversion method. Zeolite of the sodium type is prepared from coal FA by 1, 1.5, and 3 mol/L sodium hydroxide solutions (ZE1, ZE1.5, and ZE3). These adsorbents’ morphology, crystal structure, scanning electron microscopy, Fourier transform (FT)-IR spectra, cation exchange capacity (CEC), specific surface area and pore volumes, and pH_pzc were determined. An adsorption experiment was performed to evaluate the effects of contact time, pH, temperature, and coexistence. From the results, the values of CEC and specific surface area of prepared samples was in the order ZE3 < ZE1.5 < ZE1. The similar trends were observed in lead ions adsorption. In addition, our obtained data elucidate that the ion exchange with sodium ions in the interlayer ZE1 is one of the adsorption mechanisms of Pb²⁺ from water layer. Finally, lead ions adsorbed on ZE1 could be desorbed using a hydrochloric acid solution, showing that ZE1 could be reused as a water purification agent.