Effect of ozonated water on the surface roughness of dental stone casts

Abstract

Infection control of dental stone cast is an important issue. Ozone is effective for disinfection against microorganisms and inactivation of viruses. However, there is little information regarding the use of ozone. We prepared 4 types of gypsum specimens and 3 types of disinfectants (4–5 ppm Ozonated water [OZW], 2% glutaraldehyde [GL], and 1% sodium hypochlorite [SH]). Gypsum specimens were immersed in each disinfectant for 5 and 10 min, and surface roughness was then examined using laser scanning microscopy. Surface microstructure was investigated using scanning electron microscopy. Immersion of gypsum specimens in SH, GL, and OZW increased the surface roughness to a maximum of 1.04, 0.37, and 0.30 μm, respectively, based on the difference between the average values of surface roughness before and after the disinfection procedure. The effects of OZW and GL were comparable. OZW is useful as a candidate for relatively safe disinfection of material for dental stone casts.