抄録
In this study, we examined the effect of the transmitted amount of visible light through a resin composite on the curing depth and polymerization conversion. Transmitted amount of visible light was strongly dependent on the magnitude of refractive index difference that existed between the resin and silica filler. More specifically, the differences arose from the type of base monomer used. The transmitted amount of visible light exhibited a good correlation with the curing depth and Knoop hardness ratio of the bottom surface against the top surface of the resin composite. To improve the polymerization conversion of the cavity floor, it is important to reduce the refractive index difference that exists between the base resin and silica filler.
