e-Journal of Surface Science and Nanotechnology
Online ISSN : 1348-0391
ISSN-L : 1348-0391
Conference -NSS-6-
Surface Processing by Polyatomic Cluster Ion Beams
Gikan H. TakaokaHiromichi RyutoMitsuaki TakeuchiHiroshi Mukai
著者情報
ジャーナル フリー

2011 年 9 巻 p. 168-172

詳細
抄録
We produced polyatomic clusters such as ethanol and water clusters by an adiabatic expansion phenomenon of vaporized material. The cluster ions were irradiated by changing the incident energy on various kinds of substrates such as mica, Si(100), SiO2 and photo-resist substrates. AFM observation showed that irradiation trace with the diameter of approximately 20 nm was formed on mica substrates by ethanol cluster ion irradiation. Also, it showed that surface roughness of Si(100) substrates irradiated was less than 1 nm, even though the surface was sputtered by ethanol and water cluster ion irradiation. Furthermore, RBS channeling measurement showed that the irradiation damage of Si(100) surfaces sputtered by ethanol and water cluster ions was smaller than that by the Ar monomer ion irradiation. With regards to sputtering and patterning, the sputtered depth of Si(100), SiO2 and photo-resist surfaces by ethanol cluster ion irradiation increased with increase of the acceleration voltage. The sputtering yield of the Si(100) surface was a few hundreds times higher than that by Ar monomer ion irradiation at the same acceleration voltage. In addition, micro-patterning was performed on the Si(100) surface, and sharp-edged patterns with a line-width of 0.5 μm to 3 μm were achieved by ethanol cluster ion irradiation. [DOI: 10.1380/ejssnt.2011.168]
著者関連情報

この記事はクリエイティブ・コモンズ [表示 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by/4.0/deed.ja
前の記事 次の記事
feedback
Top