IEICE Electronics Express
Online ISSN : 1349-2543
ISSN-L : 1349-2543
Design of edge termination on non-uniform 100-V super-junction trench power MOSFET
Young Hwan Lho
Author information

2013 Volume 10 Issue 6 Pages 20120797


A design methodology for the edge termination is proposed to achieve the same breakdown voltage of the non-uniform super-junction (SJ) trench metal-oxide semiconductor field-effect transistor (TMOSFET) cell structure. A simple analytical solution for the effect of charge imbalance on the termination region is suggested, and it is satisfied with the simulation of potential distribution. The doping concentration decreases linearly in the vertical direction from the N drift region at the bottom to the channel at the top. The structure modeling and the characteristic analyses for potential distribution and electric field are simulated by using of the SILVACO TCAD 2D device simulator, Atlas. As a result, the breakdown voltage of 132V is successfully achieved at the edge termination of non-uniform SJ TMOSFET, which has the better performance than the conventional structure in the breakdown voltage.

Information related to the author
© 2013 by The Institute of Electronics, Information and Communication Engineers
Previous article Next article