Abstract
A broadband 5-bit CMOS step attenuator in small area with low insertion loss is presented in this paper, which is implemented with three independent attenuation modules and two compact T-type attenuation networks. Two of the independent modules are switched π-typed, and the other is bridged-T type. The compact T-type attenuation networks share the series branches with the adjacent modules to decrease the chip area and insertion loss. The proposed attenuator has a maximum attenuation range of 0–31dB with 1dB-increase at the operational frequency range of 5–20GHz and consumes a layout area cost of 0.44 mm2. The insertion loss is less than 8.7 dB. The RMS insertion amplitude and phase error are less than 0.45 and 5.7°, respectively.
