繊維学会誌
Online ISSN : 1884-2259
Print ISSN : 0037-9875
一般報文
1×1ゴム編編成域での結び目による糸切れ率の予測
村山 和弘柳沼 伸明小野寺 泰子西村 真次追沼 龍三
著者情報
ジャーナル フリー

2012 年 68 巻 5 号 p. 125-137

詳細
抄録

A mathematical model for prediction of the end breakage rate due to knots in the 1×1 rib knitting zone is formulated by using the mathematical model of the 1×1 rib knitting process and the mechanism of the end breakage due to knots in the 1×1 rib knitting zone. The only unknown value in this computer program based on this model is the yarn tension(Tr) in the trailing arm of the loop held the needle that got out of the step length of cam. Tr is obtained by the simulated calculation used this program so that the calculated end breakage rate agrees with the experimental end breakage rate. Then the effects of the depth of stitch draw, the cam angle, the step length of cam and the input tension on Tr are described. The results obtained using this program are as follows. 1) the jamming rates of knots in the 1×1 rib knitting zone increase with the increase of the depth of stitch draw, the step length of cam and the input tension, but decreases with the increase of the cam angle. 2) the end breakage rates due to knots in the 1×1 rib knitting zone increase with the increase of the depth of stitch draw, the step length of cam and the input tension, but decrease with the increase of the cam angle.

著者関連情報
© 2012 The Society of Fiber Science and Technology, Japan
前の記事 次の記事
feedback
Top