Actual measurement of temperature movement occurring in the pose joints of extruded cement panel

Abstract

Extruded cement panel (hereinafter referred to as ECP) is workability, design, adopted in recent years from advantages such as low cost has increased.Although were often used in conventional warehouses and factories buildings it has also been used in buildings in recent years that require high water tightness of office buildings and hospitals.On the other hand, if you look in terms of seal waterproof, joint width is feared can vary greatly depending on the temperature change of the ECP.In particular, little detailed data with respect to the joint movement of the ECP of the long.In this study, we measured of the produced joint movement the actual size of the specimen using the ECP of the long size commonly used in the real property. In addition, we examined the applicability of the current joint design method for thermal movement.