抄録
The full-digital audio amplifiers are advantageous with the points of its high power efficiency and its possibility of high fidelity due to the digital signal processing. With the full-digital amplifier, class-D amplifiers are used to drive the load with PWM signals produced from the source signal. Unfortunately, the signals are distorted when the PCM signals are converted to the PWM signals because the pulse-width modulation is a nonlinear conversion from the viewpoint of transient responses. This paper proposes a way to compensate the distortion caused by the pulse-width modulation. A feedforward compensation approach is used because of the simplicity of implementation. The distortion components are estimated with the source signals and its time-derivative signals and used to cancel out them by subtracting them from the source signals. A numerical example with two-tone test is performed to show the effectiveness of the proposed method. The distortion compensation scheme used here may be applicative to other applications.
