This paper deals with the new method that makes micro-holes with electrodeposition photoresist (EDPR) as a sacrificial layer. The EDPR was deposited on a silicon-mold made by ICP-RIE. Ni film was plated on a silicon-mold covered with EDPR. Etched through a gap between a silicon-mold and the Ni film, the Ni film came off from the silicon-mold. As a result, we could make Ni films that have micro hole of 9.2µm in diameter, and 56µm in depth on an experimental basis, and verified the silicon-mold that lateral faces of columns did not bare scratch marks. Moreover, the circularity roundness was able to fill 1.5µm which was the specification of the printer nozzle.
J-STAGEがリニューアルされました! https://www.jstage.jst.go.jp/browse/-char/ja/