International Journal of Automation Technology
Online ISSN : 1883-8022
Print ISSN : 1881-7629
ISSN-L : 1881-7629
Special Issue on Advanced Cutting Science and Technologies
Chatter Suppression in Parallel Turning Assisted with Tool Swing Motion Provided by Feed System
Shuntaro YamatoToshiki OkumaKenichi NakanishiJunji TachibanaNorikazu SuzukiYasuhiro Kakinuma
著者情報
ジャーナル オープンアクセス

2019 年 13 巻 1 号 p. 80-91

詳細
抄録

Parallel turning technology has been attracting attention as an important technology to enhance the productivity of multitasking machine tools. To maximize the productivity advantage of parallel turning, chatter avoidance or suppression is one of the most noteworthy concerns. In this study, a novel chatter suppression technique using tool swing motion is provided by a feed drive system. The optimal design methodology of the tool swing motion for effective chatter suppression is also introduced based on its analogy with the spindle speed variation technique under the shared-surface parallel turning and rigid-tool and flexible-workpiece assumptions. The proposed method was evaluated with regard to the chatter stabilizing performance and workpiece runout as compared to conventional equal pitch turning and unequal pitch turning for chatter suppression. As a result, the proposed tool swing parallel turning exhibited a high chatter stabilizing performance without eccentricity of the workpiece and enhanced surface quality, although particular swing marks were left on the machined surface.

著者関連情報

この記事は最新の被引用情報を取得できません。

© 2019 Fuji Technology Press Ltd.

This article is licensed under a Creative Commons [Attribution-NoDerivatives 4.0 International] license (https://creativecommons.org/licenses/by-nd/4.0/).
The journal is fully Open Access under Creative Commons licenses and all articles are free to access at IJAT Official Site.
https://www.fujipress.jp/ijat/au-about/
前の記事 次の記事
feedback
Top