JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Online ISSN : 1881-1299
Print ISSN : 0021-9592
Biochemical, Food and Medical Engineering
Enhancement in Biodegradability of Excess Sludge by Using a Centrifugal Vibration Mill
Akira SanoYoshiyuki BandoKeiji YasudaMasaaki NakamuraAkira SengaEimei Kiyokawa
著者情報
ジャーナル 認証あり

2005 年 38 巻 6 号 p. 446-449

詳細
抄録
In order to enhance the biodegradability of the excess sludge generated from the wastewater treatment, a centrifugal vibration mill was used to mill the activated sludge. The centrifugal vibration mill had a column with a volume of about 10 × 10–3 m3 and the sphere stainless steel balls were used. The operational conditions were changed, and the biodegradability of milled sludge was evaluated by using the BOD. The ball diameter of 7.9 mm was optimum in this experimental condition. The biodegradability of sludge increased with the milling time and became constant beyond 12 minutes. It had a maximum when the effective volume fraction (the ratio of the sludge volume to the void volume in ball bed) was unity.
著者関連情報
© 2005 The Society of Chemical Engineers, Japan
前の記事 次の記事
feedback
Top