抄録
For the improvement and stable use of various superconducting applications using REBa2Cu3Oy (REBCO) coated conductors, the enhancement of the critical current density (Jc) in high magnetic fields is essential. It is known that BaMO3 (BMO; M = Zr, Sn, Hf) nanorods can improve the in-field Jc of REBCO films. Furthermore, the density and formation can be controlled by the deposition conditions such as deposition temperature and BMO content. In this study, our aim was to improve the Jc of SmBa2Cu3Oy (SmBCO) films in high magnetic fields. We tried to introduce high-density BaHfO3 (BHO) nanorods into SmBCO films by increasing the BHO content. We fabricated 2.3, 4.9 and 7.2 vol.% BHO-doped SmBCO films at the same deposition temperature, and compared the geometric formation of nanorods and flux pinning properties. From TEM observation, the densities of BHO nanorods increased with increases in BHO content, and the diameters of all nanorods were almost the same (i.e., approximately 12 nm). The highest density and matching field were 1711 /μm2 and 3.54 T in a 7.2 vol.% sample. The flux pinning force of the sample with a higher matching field was effective in higher fields in the magnetic field dependence of Jc. This was in good agreement with theories and many reports. In irreversibility field lines, a unique behavior, which probably originated in the thick diameters, was observed around the low magnetic field.
