P-06　間伐材/プラスチック共熱分解ガスの燃焼特性に関する研究

抄録

The objective of this study was to investigate the combustion characteristics of a gas mixture produced by the copyrolysis of thinned wood and plastics. The low-calorie gas produced in a fixed-bed reactor at low temperature was combusted in a combustor with an air atmosphere. The addition of a small amount of PP to a fuel based on thinned wood and PET was advantageous for the formation of light hydrocarbons, however, was not effective for the reforming of light hydrocarbons by Ni catalyst at PP addition rates of 20 wt.% or higher. In addition, an increase in the PP addition rate was effective in improving ignition performance in lean combustion of the gas mixture.