粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
下地膜を用いずに作製したc軸配向Baフェライト薄膜の薄層化および生成機構
小湊 淳志柿崎 浩一平塚 信之
著者情報
ジャーナル オープンアクセス

2003 年 50 巻 2 号 p. 149-153

詳細
抄録
The c-axis oriented Ba-ferrite thin films without underlayer were prepared, and their magnetic properties and crystal structures were investigated. Ba-ferrite thin films were deposited on fused quartz substrates, which were kept at room temperature, using rf diode magnetron sputtering apparatus. Two kinds of Ba-ferrite target disks were used; one was FeBa ratio of 6.5 and another was that of 16. The films with a thickness of 20 nm were deposited by using the target with Fe/Ba ratio of 16, and then annealed at 800°C for 5 hrs in air. They were not crystallized, but the films deposited by using the target with Fe/Ba ratio of 6.5 and then annealed at 800°C for 5 hrs in air were crystallized. Thus using target with Fe/Ba ratio of 6.5 is found to be useful for reduction of thickness. Moreover, the c-axis of Ba-ferrite films was oriented perpendicular to the film surface that was caused by the effect of { 111 } oriented Fe3O4 formed at interface between film and substrate. It was confirmed that the {111} oriented Fe3O4 was formed because of diffusion of Ba ions to the substrate.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top