日本ロボット学会誌
Online ISSN : 1884-7145
Print ISSN : 0289-1824
ISSN-L : 0289-1824
負荷感応無段変速機を用いた100 [g] ・100 [N] 指の開発
高木 健小俣 透
著者情報
ジャーナル フリー

2006 年 24 巻 2 号 p. 263-269

詳細
抄録
This paper shows a 99 [g] finger joint that can exert a very strong fingertip force of more than 100 [N] . We have proposed a simple and small load-sensitive continuously variable transmission (CVT), which consists of five links and a torsion-coiled spring. The maximum fingertip force of our previous finger was limited by the mechanical strength of its links and bearings, not by the power of its DC motor. If the machine strength can be improved, a much greater fingertip force can be expected. To design a lightweight CVT with sufficient mechanical strength, we analyze the internal force of the CVT and select light plain bearings. We also analyze the stress by using the finite element method and select the materials of its links. Experimental results verify that the maximum fingertip force is more than 100 [N] near the singular configuration of the CVT and the maximum angular velocity is more than 550 [deg/s] . These motions are impossible without the CVT. We also developed a very light shape memory alloy brake of 0.56 [g] . The CVT with the brake can hold a fingertip force of more than 100 [N] not only near the singular configuration. The electric energy consumed by the brake is much less than that by the DC motor.
著者関連情報
© 社団法人 日本ロボット学会
前の記事 次の記事
feedback
Top