International Journal of Automotive Engineering
Online ISSN : 2185-0992
ISSN-L : 2185-0992
Research Paper
Numerical Simulation of Soot Trapping Process and Manufacturing of Three-Way Catalyzed Membrane Filter
Teerapat SuteerapongpunKatsunori Hanamura
著者情報
ジャーナル オープンアクセス

2022 年 13 巻 2 号 p. 38-45

詳細
抄録
Soot trapping on GPF, TWC Membrane fabrication on GPF, and soot trapping on TWC membrane have been studied using computer numerical simulation. The results of pressure drop, filtration efficiency, and morphology visualization satisfied the experimental results. The simulation could clarify the trapping phenomena up to 3D-nanoscale resolution, which overcame an experimental limitation. Visualization revealed the particles first trapped on the substrate generating a dendrite structure at the constricted area. Then, it expanded by accumulating flying particles until the bridge structure was completed, which is the same point of 100% filtration efficiency that proved the hypothesis from the experiment.
著者関連情報
© 2022 Society of Automotive Engineers of Japan, Inc

This article is licensed under a Creative Commons [Attribution-NonCommercial-ShareAlike 4.0 International] license.
https://creativecommons.org/licenses/by-nc-sa/4.0/
次の記事
feedback
Top