農業機械学会誌
Online ISSN : 1884-6025
Print ISSN : 0285-2543
ISSN-L : 0285-2543
プラウイングに及ぼす2・3の影響について
森田 昇田谷 暢久
著者情報
ジャーナル フリー

1956 年 18 巻 3 号 p. 93-96

詳細
抄録
Surveying the relation of the draft resistance, the vertical suction and the cutting angle, we obtained the following results.
The draft resistance did not be varied by the increase of the suction.
The draft resistance not related to the suction, but it enlarged with the increase of the cutting angle.
On the field, we used the plow that added to 10 kg weights on the center of gravity and that not added the weight, and the working depth was increased by adjustment of the hitch.
The min. specific resistance was 0.33Kg/cm2 in the range of 9-10cm depth on the no-load plow, but 0.32Kg/cm2 in the range of 13-14cm depth on the 10kg loaded plow.
Wb/a tanθ=H was formed of on this equilibrium point; that is the min. point of specific resistance.
We found that its weight and the position of the center of gravity had important connection with the deep plowing, and one of cause that the specific resistance increased with the working depth, was due to the increase of the cutting angle of the plow.
著者関連情報
© 農業機械学会
前の記事 次の記事
feedback
Top