JSME international journal. Ser. 1, Solid mechanics, strength of materials
Print ISSN : 0914-8809
Forging of Disk-Shaped Products by a Flexible Machine Controlled by a Microcomputer
Kozo OSAKADAMitsunobu SHIRAISHIKenji KURA
著者情報
ジャーナル フリー

1989 年 32 巻 3 号 p. 378-384

詳細
抄録
A flexible forging method for production of disk-shaped product in which the billet is successively compressed by a pair of upper dies is proposed. The distance between the upper dies, the ram stroke and the angle of rotation of lower die are controlled by a microcomputer. To examine the problems associated with this method, disk-shaped billets of plasticine are compressed on a small-size flexible machine. It is observed that flaws appear on the compressed surface of the product and nonuniform deformation results over the circumferential surface of product. A sound product without large flaws is obtained when disks are repeatedly compressed with a small reduction in height by dies having a round corner, the radius of which is greater than the reduction in height. The nonuniform deformation over the circumferential surface is effectively reduced by employing a large rotation angle after each compression.
著者関連情報
© The Japan Society of Mechanical Engineers
前の記事 次の記事
feedback
Top