Variation of Discharge Profile with Discharge Power in Electric Discharge Machining (EDM)

JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry

Print ISSN : 0914-8825

Variation of Discharge Profile with Discharge Power in Electric Discharge Machining (EDM)

Can COGUN

著者情報

キーワード: Electric Discharge Machining, Voltage Pulse Trains, Discharge Power, Discharge Pulses, Arcs, Open Circuit Pulses, Short Circuit Pulses

ジャーナルフリー

1989 年 32 巻 3 号 p. 480-483

DOI https://doi.org/10.1299/jsmec1988.32.480

詳細

抄録

This paper summarizes experimental investigations on the effect of discharge power on discharge profile in Electric Discharge Machining (EDM). Discharge power is changed between 95 W and 310 W, and variations in time-lag durations of discharges, occurrence of open and short circuit pulses (inactive pulses), actual machining time and successive occurrence of discharges are investigated.

著者関連情報

© The Japan Society of Mechanical Engineers

お気に入り & アラート

関連記事

閲覧履歴

前身誌

Bulletin of JSME

JSME international journal

JSME international journal. Ser. 1, Solid mechanics, strength of materials

JSME international journal. Ser. A, Mechanics and material engineering

JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties

後続誌

JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing

JSME International Journal Series B Fluids and Thermal Engineering

JSME International Journal Series A Solid Mechanics and Material Engineering

JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing

Top