JSME Materials and Processing Conference (M&P)
Online ISSN : 2424-2861
10.1
会議情報
206 Preparation of ultra fine-grained magnesium alloy by mechanical alloying of AZ31 chip-aluminum powder mixture
Ayako OhguchiEiji YuasaKatsuyoshi Kondoh
著者情報
会議録・要旨集 フリー

p. 110-113

詳細
抄録
To produce magnesium alloy with ultra fine-grain, size, an aluminum powder was mixed to turning chips of AZ31 alloy with various contents, and then they were mechanically alloyed for various milling times. Microstructural changes of the mechanically alloyed powder with milling were investigated. Super-saturated solid solutions of the magnesium phase are formed in the Mg-12mol%Al, its crystalline size has a nanometer scale. The solid solutions are formed the eutectic structure together with Mg_<17>Al_<12> in the 30mol%Al powder mixtures mechanically alloyed for long milling time. In the case of the Mg-40mol%Al and 61.5mol%Al powders, the formation of the intermetallic compounds yields by the mechanical alloying for shorter milling time, and these crystals become to amorphous phase after the prolonged milling time. The harness of particles in the mechanically alloyed powder increases with forming of the super saturated solid solution or the intermetallic compound and their refining.
著者関連情報
© 2002 The Japan Society of Mechanical Engineers
前の記事 次の記事
feedback
Top