Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21
Online ISSN : 2424-3086
ISSN-L : 2424-3086
2003
会議情報
329 High Speed Machining of Bio-Titanium Alloy with a Binderless cBN Tool
K. HIROSAKIK. SHINTANIH. KATOF. ASAKURAK. MATSUO
著者情報
会議録・要旨集 フリー

p. 571-576

詳細
抄録
Using a binderless cBN tool, improvement of processing efficiency was tried in machining of a vanadium-free titanium alloy, Ti-6Al-2Nb-1Ta which was recently applied for a surgical implant material. The tool which is prepared through the direct conversion sintering of h-BN under both high pressure and temperature, exhibits an improved high temperature durability. It was confirmed that a binderless cBN tool exhibited lower flank wear and kept sharper cutting edge compared to the tools made of sintered carbide, conventional cBN with binder and polycrystalline diamond with Co-based binder, after turning in cutting speed of 4.2m/s, feed rate of 0.15mm/rev, depth of cut of 0.5mm under an application of a high pressure coolant. Also, milling tests were conducted with a radius end mill tool which was made of the binderless cBN material. The possibility of high speed cutting in milling process was found.
著者関連情報
© 2003 The Japan Society of Mechanical Engineers
前の記事 次の記事
feedback
Top