Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21
Online ISSN : 2424-3086
ISSN-L : 2424-3086
セッションID: 1702
会議情報
1702 An Improved Approach to Real-Time Compensation of Machining Error Caused by Deflection of End Mill
Kenji SHIMANAEiji KONDOHiroko KARASHIMAMitsuhiro NAKAOShunichi YAMASHITA
著者情報
会議録・要旨集 フリー

詳細
抄録
The purpose of this study is to improve the real-time compensation of machining errors caused by deflection of end mills with small diameter like ball end mills. For this purpose, a compensation system of machining error was proposed using the estimation method obtained from the preliminary experiments, and the validity of the system was verified in cutting tests. Cutting tests where the axial depth of cut linearly increased with progress of cutting were carried out to measure cutting forces during end milling operations. As a result, the machining error was able to be reduced about 80% in both down and up cuts with increase in axial depth of cut by the proposed compensation system.
著者関連情報
© 2015 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top