抄録
The influence of the positioning error, the eccentricity or shape error, which is made during the milling process, at the planetary gear center or the internal gear of the star type planetary gear trains to the torsional resonance are discussed using the simulating program. The program was previously confirmed that it can sufficiently simulate the vibration occurrence speed of the rotational shaft and the vibration orbit of the floating sun gear. In the conclusion, the positioning of the gears make the change of the self-centering position of the floating sun gear and the shape of the movable area of the sun gear. But they are not the cause of the resonance, because the resonance does not occur without the forced torque. The eccentricity of the planetary gear can be the cause of the resonance when the rotation speed of the planetary gear becomes the natural frequency of the rotating shaft. But the eccentricity of the internal gear is not the cause of the resonance. The triangle shape error of the internal gear, which is measured in the experiment, also simulated. And it is made clear that the shape error can be the cause of the resonance. This can be considered that the transmission error can be made by the coincidence of the shape and the number of planetary gears.
