年次大会講演論文集
Online ISSN : 2433-1325
セッションID: 2412
会議情報
2412 標準PM生成装置により生成されるPMの性状に及ぼす燃料中硫黄分の影響(G07-1 エンジンシステム(1),21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)
山本 知恵美内野 寿一斉藤 正浩古畑 朋彦新井 雅隆
著者情報
会議録・要旨集 フリー

詳細
抄録
Nanometer size particulate matter (Nano-PM) emitted from a flame of fossil fuel has been received attention due to their harmful potential for health. However, detailed knowledge about Nano-PM formation mechanism has not been clarified yet. The objective of this study is to investigate the relation between the PM characteristics and sulfur in fuel using standard Nano-PM generator. A pool flame was used for production of Nano-PM. Kerosene and Thiophen added Kerosene were used as fuels. It was clear that the flame form changed from closed flame to open flame, when fuel flow rate M_f was over 0.4mg/s in the both fuels. The flame tip of open flame was opened and visible soot was emitted from the tip. As for the size distribution of PM, the peak diameter was gradually increased with an increase of fuel flow rate in Kerosene flame, but it was suddenly increased when the fuel flow rate exceeded 0.4mg/s, in Thiophene added Kerosene flame.
著者関連情報
© 2008 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top