Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE
Online ISSN : 2424-3132
2009
Session ID : MNS-11
Conference information
MNS-11 DEVELOPMENT OF ELECTROHYDRODYNAMIC (EHD) MICROPUMP TO GENERATE OSCILLATING FLOW AT LOW FREQUENCIES(Micro/Nanosystem Science and Technology III,Technical Program of Oral Presentations)
Yuhei FUJIWARAIchiro KANOIchiro TAKAHASHI
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract
An electrohydrodynamic (EHD) micropump to generate oscillating flow is newly developed and experimentally tested. The size of the present EHD pump is 24×30×7.8mm. A pumping channel fabricated in this EHD pump is bended in parallel in order to extend the pumping channel. The channel has the dimensions of 24×48×0.9mm, in which ten pairs of electrodes are fabricated. The maximum static pressure generated by the present EHD pump is about 550 Pa at the input of dc 1 kV, and maximum flow-rate is 4.3 ml/min at unloaded condition. In order to generate symmetric oscillating flows, alternate voltage is applied. It is ascertained that the present EHD pump is successful in generating the symmetric oscillating flows at low frequencies (0.01 Hz〜0.05 Hz).
Content from these authors
© 2009 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top