M&M材料力学カンファレンス
Online ISSN : 2424-2845
セッションID: OS1608
会議情報

傾斜機能ポーラスアルミニウムをコアとしたサンドイッチ構造の作製
*宇都宮 登雄廣西 滉也半谷 禎彦
著者情報
会議録・要旨集 フリー

詳細
抄録

A porous aluminum (Al) has light weight and high energy absorption characteristics. However, the tensile strength and bending strength of porous Al is lower than those of dense Al materials. It is promised that a sandwich structure consisting of a porous Al core and dense metallic face sheets is effective to use as structural elements. In this study, sandwich structures of a functionally graded (FG) porous Al core of ADC12 and A6061 with two face sheets of A1050 were fabricated using friction stir welding (FSW) route. The fabricated sandwich structures of FG porous Al core were observed by X-ray computed tomography (CT). Through the observations of the pore structures and the thickness of ADC12 layer or A6061 layer in FG porous Al core, foaming conditions for sandwich structure of FG porous Al core were examined. It was found that sandwich structure with each layer of ADC12 and A6061 of good pore structures and almost same thickness was successfully fabricated by controlling holding time and thickness of ADC12 and A6061 precursors.

著者関連情報
© 2019 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top