2次均質化法を用いた多結晶材料の圧縮変形における寸法依存性と加工条件の関係評価

抄録

In a hot steel rolling process, the rolling force and the strain distribution in a rolled material is strongly affected by the friction coefficient between the work roll and the rolled material and the rolling shape factor which is the ratio of the contact length between the work roll and the material to the material thickness. In this respect, many numerical attempts have been made to reveal their relationship. These simulations often suppose the homogeneity of the material because of simplicity. However, the recent researchers have suggested that the heterogeneity in microstructure can cause size effect on deformation behavior of polycrystalline material. In order to clarify the size effect in the rolling process, this study investigates the size effect on the deformation force and the strain distribution in the plane strain compression which is simple and similar to the flat rolling in effects of the friction coefficient and the shape factor, using the second-order homogenization-based finite element (2nd HMFE) simulations. Simulations are performed by two-dimensional 2nd HMFE with different friction coefficients, shape factors, work hardening parameters and size ratios between micro and macrostructures, which are related to strain heterogeneity in a deformed material. As a result, in case of the small friction coefficient, relatively uniform deformation tends to occur in the material, which results in small effects of the size ratio on deformation behavior. In contrast, in case of the large friction coefficient, size effects on the compression force and the strain distribution appears to be large when the shape factor of a deformed material approaches 1. It is considered to be because high strain gradient tends to reduce the plastic work in the microstructure and a deformation band in which the strain gradient is higher is formed in the material in such a case.