日本口腔インプラント学会誌
Online ISSN : 2187-9117
Print ISSN : 0914-6695
ISSN-L : 0914-6695
原著
グロー放電プラズマ処理チタンの親水性持続: 水中あるいはアセトン中保存の効果
奥森 直人北村 隆浅川 和也五十嵐 俊男吉成 正雄
著者情報
ジャーナル フリー

2007 年 20 巻 2 号 p. 287-292

詳細
抄録
Surface wettability of implants and functional groups created on implant surfaces play important roles in the initial adhesion and subsequent behavior of cells. This study aimed to clarify the effect of glow-discharge plasma treatment and storage condition on surface wettability (contact angle) of titanium. In addition, functional groups created on titanium surfaces were identified. The water contact angle dramatically decreased after glow-discharge plasma treatment with less than 5 degrees, leading to hydrophilicity. This value rapidly increased over time in air atmosphere, and reached 72 degrees at 7 days. On the other hand, the hydrophilicity was maintained by storage in distilled water or acetone with contact angles of 43 degrees or 14 degrees at 7 days, and 54 degrees or 29 degrees at 30 days, respectively. X-ray photoelectron spectroscopy revealed that basic hydroxyl groups were introduced on the titanium surfaces by immersion in distilled water after glow-discharge plasma treatment, suggesting that this process promotes osseointegration of titanium implants. In conclusion, glow-discharge plasma treatment and subsequent storage in water or acetone is a promising method for controlling the surface wettability and introduction of functional groups.
著者関連情報
© 2007 公益社団法人日本口腔インプラント学会
前の記事 次の記事
feedback
Top