写真測量とリモートセンシング
Online ISSN : 1883-9061
Print ISSN : 0285-5844
ISSN-L : 0285-5844
原著論文
近接デジタル写真測量におけるExif情報を用いたカメラキャリブレーションについて
中野 一也近津 博文
著者情報
ジャーナル フリー

2009 年 48 巻 3 号 p. 180-187

詳細
抄録

The authors have been concentrating on developing convenient 3D measurement system using consumer grade digital cameras, and it was concluded that the system is expected to become a useful 3D measurement system for the various close range application fields. There were some issues, however, to realize a convenient photogrammetry using consumer grade digital cameras. One of issues is acquisition of accurate scale factor since pixel coordinates should be transformed into image coordinates using scale factor. Scale factor was generally computed using pixel numbers in a line on the display and sensor size which was given from manufacturer's specifications. Nevertheless, it became impossible to obtain sensor size for consumer grade digital cameras even from manufacturer's specification, and scale factor is unavoidably estimated from the sensor type such as 1/2 inch CCD sensor. On the contrary, focal length of digital cameras can be obtained from Exif file which is recorded on the image.
In these circumstances, Exif dependent (E-D) calibration was proposed in this paper. The most remarkable point of the E-D calibration is its ability to calculate both of exterior and interior orientation parameters without scale factor or manufacturer's specifications.

著者関連情報
© 2009 社団法人 日本写真測量学会
前の記事 次の記事
feedback
Top