Fast Scanning Mass Spectrometer

Toshio KONDO; Kazou WATANABE

doi:10.5702/massspec1953.14.257

高速走査形質量分析計

近藤敏郎, 渡辺一生

著者情報

ジャーナルフリー

1966 年 14 巻 5 号 p. 257-264

DOI https://doi.org/10.5702/massspec1953.14.257

詳細

発行日: 1966/12/25 受付日: 1966/08/18 J-STAGE公開日: 2010/06/28 受理日: - 早期公開日: - 改訂日: -
訂正情報
訂正日: 2010/06/28 訂正理由: - 訂正箇所: 論文受付日訂正内容: 訂正後 : 19660818

訂正日: 2010/06/28 訂正理由: - 訂正箇所: 論文抄録訂正内容: Wrong : The ion detector for a fast scanning mass spectrometer has been developed. The instrument used is a Hitachi mass spectrometer: modified RMU-6D, of a single focusing, 90° sector type. A mass range of m/e 10-500may be magnetically scanned in 3 seconds: the peaks are recorded on strip chart of are cording galvanometer. The ion detector is described which incorporates a electron-multiplier and a fast response electrometer. The electron multiplier consists of 10 stage Ag-Mg dynodes. The electrometer has the feedback resistor sorunded a metal sleeve which is connected the output of the amplifier through a P.I.D. network and the response speed is increased. The response and the noise of the ion detector are discussed. Design procedures led from the discussion and the complete circuits are given. The ion detector can be used in measurement of current from 2.5×10^-11 to 1×10^-14 amperes and the 90% inditial response is 40 microseconds.
Right : The ion detector for a fast scanning mass spectrometer has been developed. The instrument used is a Hitachi mass spectrometer: modified RMU-6D, of a single focusing, 90° sector type. A mass range of m/e 10-500 may be magnetically scanned in 3 seconds: the peaks are recorded on strip chart of are cording galvanometer.
The ion detector is described which incorporates a electron-multiplier and a fast response electrometer. The electron multiplier consists of 10 stage Ag-Mg dynodes. The electrometer has the feedback resistor sorunded a metal sleeve which is connected the output of the amplifier through a P.I.D. network and the response speed is increased.
The response and the noise of the ion detector are discussed. Design procedures led from the discussion and the complete circuits are given. The ion detector can be used in measurement of current from 2.5×10^-11 to 1×10^-14 amperes and the 90% inditial response is 40 microseconds.

訂正日: 2010/06/28 訂正理由: - 訂正箇所: 引用文献情報訂正内容: 訂正前 : J
J
J
J
J

訂正後 : 富田,本誌,29号,57(1965)
伊沢,“自動制御入門”pp. 11(1961),オーム社,東京.
宮地,竹谷,三橋,“固体電子工学”pp. 274(1959),日刊工業新聞社,東京.

訂正日: 2010/06/28 訂正理由: - 訂正箇所: PDFファイル訂正内容: -

抄録

The ion detector for a fast scanning mass spectrometer has been developed. The instrument used is a Hitachi mass spectrometer: modified RMU-6D, of a single focusing, 90° sector type. A mass range of m/e 10-500 may be magnetically scanned in 3 seconds: the peaks are recorded on strip chart of are cording galvanometer.
The ion detector is described which incorporates a electron-multiplier and a fast response electrometer. The electron multiplier consists of 10 stage Ag-Mg dynodes. The electrometer has the feedback resistor sorunded a metal sleeve which is connected the output of the amplifier through a P.I.D. network and the response speed is increased.
The response and the noise of the ion detector are discussed. Design procedures led from the discussion and the complete circuits are given. The ion detector can be used in measurement of current from 2.5×10^-11 to 1×10^-14 amperes and the 90% inditial response is 40 microseconds.

責任著者(Corresponding author)

訂正情報

J-STAGEへの登録はこちら（無料）