MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Correlation between Microstructure and Magnetic Properties in Sm2Fe17N3 Magnet Prepared by Pulsed Current Sintering
Hiroyuki NakayamaKenta TakagiKimihiro OzakiKeizo Kobayashi
著者情報
ジャーナル フリー

2012 年 53 巻 11 号 p. 1962-1966

詳細
抄録
The consolidation of Sm2Fe17N3 powder was examined by pulsed current sintering below its decomposition temperature. Although decomposition of the powder was not observed, its coercivity decreased dramatically. Annealed powder was observed by transmission electron microscopy in order to clarify the mechanism for the reduction in the coercivity. In powder annealed at 673 K, a thin nanostructured layer was formed around the Sm2Fe17N3 particles. The crystal structure of this thin layer had a crystallographic symmetry higher than that of the Sm2Fe17N3 structure. This higher symmetry layer appeared to have a smaller magnetic anisotropic energy, allowing it to act as a nucleation site for a reverse magnetic domain, when a reverse magnetic field is applied to the magnetized powder. Therefore, the coercivity of the powder decreased below its decomposition temperature. Irregular growth of the thin layer was observed in powder annealed above the decomposition temperature, and the grown region was confirmed to be an iron phase.
著者関連情報
© 2012 The Japan Institute of Metals and Materials
前の記事 次の記事
feedback
Top