MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
A Self-Assembly and High-Robustness Super-Hydrophobic Coating Based on Waste Marble Powder
Yinting WongLiang TongYan HuPeishi Wu
Author information
JOURNALS FREE ACCESS FULL-TEXT HTML

2016 Volume 57 Issue 12 Pages 2127-2131

Details
Abstract

Uncontrolled waste marble powder contributes negatively to the environment. This paper reports a cheap and facile method to prepare a super-hydrophobic self-cleaning coating with high-robustness by using waste marble powder as the basic components. The PFOTES (1H,1H,2H,2H-Perfluorooctyltriethoxysilane) was selected as the modification agents which is self-assembled on the marble powder surface. A very low mass concentration of PFOTES (0.1208% wt.) increases the water contact angle of a coated sample from 11.3° to 138°. With the gradual increase of PFOTES, the water contact angle increases from 138° to 153°. The sliding angle value, however, varies from over 180° (the water droplet will not fall even it is turned upside down) to 6.8°, which represented the wetting model changing from Wenzel model to the Cassie-Baxter model. Thus, the super-hydrophobic self-cleaning coating is obtained. Besides, the coating showed an excellent robustness, no obvious contact angle and sliding angle differences were detected after 10 times' robustness test (the contact angle and sliding angle ranged from 147° to 155° and 6.8° to 8.5° respectively).

Information related to the author
© 2016 The Japan Institute of Metals and Materials
Previous article Next article
feedback
Top