溶接学会論文集
Print ISSN : 0288-4771
硼化物粒子分散強化Co基肉盛金属のすべり摩耗性
西田 稔荒木 孝雄茂川 幸利浅野 一郎林 洋一郎
著者情報
ジャーナル フリー

1998 年 16 巻 2 号 p. 272-281

詳細
抄録

In order to improve sliding wear characteristics at high temperature, the overlay weld metals for Co-based alloys with various amount of MoB particles were prepared using a plasma transferred arc welding process. Effects of amount of MoB particles on wear behaviors and friction coefficient of the overlay weld metals at high temperature were investigated using Ohgoshi wear tester and cylinder friction tester.
The microstructures of overlay weld metals were consisted of Co-based matrix (βCo), lamellar structure of Cr23C6 and βCo, lamellar structure of M2B and βCo and primary crystal of CoMo2B2. The volume fraction of CoMo2B2 and hardness of overlay weld metals increased with the increase in the additional boron quantity.
When the values subtracting the hardness of overlay weld metals from the hardness of S45C carbon steel were above HV300, the sliding wear resistance at high temperature was extremely improved. The friction coefficient of the overlay weld metals decreased with the increase of the test temperature. The reason is that the boride prevented the adhesion of S45C carbon steel to the overlay weld metals.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top