溶接学会論文集
Online ISSN : 2434-8252
Print ISSN : 0288-4771
変動応力載荷中の溶接施工に関する研究(第1報)
変動応力下の溶接割れ試験
中西 保正中村 義隆村山 武弘酒井 啓一河野 武亮上條 建夫
著者情報
ジャーナル フリー

1985 年 3 巻 1 号 p. 60-68

詳細
抄録

Though it is often necessary to perform repair welding in structures already constructed, welding under pulsating stress or oscillation is considered to be undesirable for operative weldability and crack sensitivity. In this study, welding crack test was carried out for HT-60 to survey the possibility of welding under pulsaring stress in bridges, offshore structures and power transmission lowers, etc.
The results obtained are as follows:
1) Tne crakes detected in welded joint under pulsating, stress are classified into solidification crack and root hot crack in weld metal.
2) The solidification crack arises under high stress frequency and high stress range.
3) The critical stress range for root hot crack is smaller than that for solidification crack, and it decreases under decrease of stress frequency and increase of heat input.
4) It was clarified that the welding under pulsating stress is possible when the restrain intensity of weld joint, stress range, groove length and stress frequency is known.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top