溶接学会論文集
Online ISSN : 2434-8252
Print ISSN : 0288-4771
LB-TRC試験法の開発とその実用性に関する検討
HY系高張力鋼溶接金属の低温割れに関する基礎的研究(第2報)
松田 福久中川 博二篠崎 賢二
著者情報
ジャーナル フリー

1987 年 5 巻 2 号 p. 233-238

詳細
抄録
This investigation was made to establish a new testing method for cold cracking of weld metal of high strength steels such as HT60, HT80 and HY130. This test was named the LB-TRC (Longitudinal Bead-TRC) test.
The effect of loading temperature on the lower critical stress was studied and moreover the lower critical stress obtained by the LB-TRC test was compared with that obtained by the conventional TRC test. On the other hand, fractographic investigation of this test was undertaken.
Consequently, it was shown that the lower critical stress and the fracture mode in the LB-TRC tested specimen were approximately equal to those obtained in the conventional TRC test and that the LB-TRC test was useful to evaluate cold cracking susceptibility of weld metal.
著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top