2011 年 17 巻 p. 17-22
This study aims to present an appropriate method on grain size analysis for sediment in flood flow. For the execution of numerical simulation on turbidity in a reservoir, it is indispensable to decide the settling velocity of particles. The laser diffraction method has been conventionally used for the grain size analysis and settling velocity is calculated by using Stokes’ formula, nevertheless, it is indicated that the settling velocity calculated by this method differs from actual settling velocity.
The authors conducted three types’ grain size analysis methods and compared the results. Among three methods, the laser diffraction method showed the distribution of larger grain size. Through this study three points were concluded. (1) Settling cylinder method was regarded to give the most reliable results for the settling velocity of fine particles. (2) The centrifugal sedimentation method could be alternate the settling cylinder method. (3) In case of using laser diffraction method, super sonic distribution treatment should be added.