日本海水学会誌
Online ISSN : 2185-9213
Print ISSN : 0369-4550
ISSN-L : 0369-4550
海水淡水化装置の高温脱気生成水による鉄系材料の腐食
神田 幸雄栂野 秀夫中内 博二大里 一夫佐々木 英次
著者情報
ジャーナル フリー

1974 年 28 巻 3 号 p. 162-167

詳細
抄録
Deaerated hot fresh-water produced by a multi-flush evaporator has much corrosive effect on ferrous materials used for the evaporator. To examine the effect of some environmental factors of the fresh-water on the corrosion of ferrous materials, autoclave tests were conducted. In this study, mild steel and 2 1/4 Cr-1 Mo steel were used as test samples and exposed to the fresh-water of various dissolved oxygen levels, chloride ion contents, and temperatures. The results obtained from this study were as follows.
Speaking in general, both the corrosion losses and the effects of the environmental conditions were small under static condition. Under a dynamic condition (flow rate 2m/sec), however, the corrosion losses indicated a remarkable increase, and at the same time, the effect of each environmental condition became clear. In all the test conditions, the corrosion resistance of 2 1/4 Cr-1 Mosteel was proved to be superior to mild steel. The corrosion rate of mild steel in the fresh-water at a high flow rate was larger than expected, and it was as large as twice than that in 3% sodium chloride solution according to conditions. These unusual results were assumed to depend on the instability of some oxide film (it may be magnetite) formed in the fresh-water.
著者関連情報
© 日本海水学会
前の記事 次の記事
feedback
Top