鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
論文
自動車シュレッダーおよびダスト中のトランプエレメント濃度の測定と重量バランス分析
松野 泰也五十嵐 佑馬林 誠一鶴岡 正顯小田部 和美長坂 徹也
著者情報
ジャーナル オープンアクセス

2007 年 93 巻 4 号 p. 330-335

詳細
抄録
Contamination of undesirable tramp metals in steel scraps from end-of-life vehicles has been of interest for many years. In this work, typical 5 mini-vehicles and 5 small-size passenger cars were dismantled and put into shredder process, in which most of the parts end-of-life vehicles were removed thoroughly before shredding process. The weights of removed parts, shredder scrap, separated non-ferrous metals and automobile shredder residue (ASR) were measured to figure out the mass balances of the end-of-life vehicles. Then, the concentration of Cu, Cr, Sn in shredder scraps and ASRs were measured. It was found that the concentrations of Cu, Cr, Sn in shredder scrap were 0.078%, 0.004%, 0% for mini-vehicles, and 0.08%, 0.015%, 0.001% for small-size passenger cars. On the other hand, relatively high concentrations of Cu, Cr, Sn in ASR were observed, which was 0.42-0.85%, 0.03-0.04%, 0.05-0.06% for mini-vehicles, and 0.59-0.74%, 0.02%, 0.04-0.15% for small-size passenger cars, respectively. It was found that most of Cu contained in the end-of-life vehicles were removed before shredding process.
著者関連情報
© 2007 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事
feedback
Top