IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
Online ISSN : 1745-1337
Print ISSN : 0916-8508
Special Section on Analog Circuit Techniques and Related Topics
Design and Modeling of a High Efficiency Step-Up/Step-Down DC-DC Converter with Smooth Transition
Yanzhao MAHongyi WANGGuican CHEN
Author information
JOURNAL RESTRICTED ACCESS

2011 Volume E94.A Issue 2 Pages 646-652

Details
Abstract

This paper presents a step-up/step-down DC-DC converter with three operation modes to achieve high efficiency and small output ripple voltage. A constant time buck-boost mode, which is inserted between buck mode and boost mode, is proposed to achieve smooth transition. With the proposed mode, the output ripple voltage is significantly reduced when the input voltage is approximate to the output voltage. Besides, the novel control scheme minimizes the conduction loss by reducing the average inductor current and the switching loss by making the converter operate like a buck or boost converter. The small signal model of the step-up/step-down DC-DC converter is also derived to guide the compensation network design. The step-up/step-down converter is designed with a 0.5µm CMOS n-well process, and can regulate an output voltage within the input voltage ranged from 2.5V to 5.5V with a maximum power efficiency of 96%. The simulation results show that the proposed converter exhibits an output ripple voltage of 28mV in the transition mode.

Content from these authors
© 2011 The Institute of Electronics, Information and Communication Engineers
Previous article Next article
feedback
Top