日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

急速圧縮膨張装置を用いた副室点火の着火・燃焼特性に関する研究
盛 大輔和久 哲志山下 陸嶋田 不美生田上 公俊森吉 泰生
著者情報
ジャーナル フリー 早期公開

論文ID: 20-00380

この記事には本公開記事があります。
詳細
抄録

The prechamber combustion characteristics were studied using a rapid compression and expansion machine (RCEM) to improve the efficiency of cogeneration natural gas engines. The torch flames generated by a prechamber were used to investigate the effect that a prechamber has on the main combustion. In our previous study, we observed the correlation between the torch flame and the main flame (which is a so-called “prechamber combustion”). In this study, the effects of prechamber parameters such as initial pressure and nozzle diameter of injection holes, equivalence ratio on prechamber combustion characteristics were investigated in detail. Especially, by comparing the combustion characteristics of methane, which is the main component of natural gas, and propane, which is a representative of small-volume components, the effects of fuel types on the ignition and combustion characteristics of pre-chamber ignition system were investigated to elucidate of the effect of fuel property. In conclusions, regarding the mechanism of prechamber-ignition combustion, it was inferred that the jet erupted from the prechamber did not directly propagate in the main chamber but included the "ignition phenomenon" of the main chamber due to the jet. In addition, under the experimental conditions of this study, it was found that the ignition delay time and the combustion period can be predicted by simple calculation, which can lead to the important guideline for the pre-chamber design.

著者関連情報
© 2021 一般社団法人日本機械学会
feedback
Top