日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

固有直交分解による特徴量抽出と随伴法を併用したマルチボディシステムのパラメータ推定法
西 凌弥原 謙介山浦 弘
著者情報
ジャーナル オープンアクセス 早期公開

論文ID: 23-00039

この記事には本公開記事があります。
詳細
抄録

Many mechanical systems such as vehicles, robots and space structures are comprised of a lot of interconnected components. The motion of the components is constrained because of mechanical joints or specified motion trajectories. Multibody dynamics is one of effective methods to analyze nonlinear dynamic behavior for such systems. On the other hand, it is quite difficult to obtain all parameters required for numerical simulation by only direct measurement in complex mechanical systems. Therefore, parameter estimation and identification techniques are crucial for simulation in practical problems. This study aims to develop a parameter estimation technique based on the adjoint method which can be applied to mathematical models used in the multibody dynamics, namely, differential algebraic equations. In addition, a feature extraction technique based on the proper orthogonal decomposition is incorporated into the parameter estimation method in order to evaluate effect of model uncertainties on an accuracy of the parameter estimation, because the joint components often involve model uncertainties due to inherent physical characteristics such as friction, contact and so on. The validity of the present method is discussed by numerical experiments using the rigid multibody systems.

著者関連情報
© 2023 一般社団法人日本機械学会

この記事はクリエイティブ・コモンズ [表示 - 非営利 - 改変禁止 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
feedback
Top