Tribology Online
Online ISSN : 1881-2198
ISSN-L : 1881-218X
Article
Preliminary Study on Laser DED Repair for the Remanufacturing of Mechanical Components
Yuri Tei, Yoshihisa Harada, Satoshi Kajino, Miki Nakano, Hiroki Mano
著者情報
ジャーナル オープンアクセス

2026 年 21 巻 4 号 p. 362-370

詳細
抄録
Remanufacturing is an effective approach for restoring damaged mechanical components to a functional condition comparable to that of new products. Laser directed energy deposition (DED) is a promising repair technique owing to its capability for localized material addition with limited thermal influence on the base material. However, the mechanical and tribological reliability of laser DED-repaired components, particularly the effects of microstructural heterogeneity between the build part and the base material, remains insufficiently understood. Herein, laser DED repair was evaluated using a maraging steel round bar as a simplified repair model before gear application. Maraging steel powder was deposited onto a maraging steel substrate using laser DED, and the microstructure, tribological behavior, and mechanical properties of repaired specimens were analyzed. Microstructural features near the joint interface were characterized via scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy and SEM/electron backscatter diffraction analyses. Tribological performance was evaluated via reciprocating friction and wear tests, whereas structural properties were assessed via tensile testing and micro-Vickers hardness measurements. Results revealed pronounced microstructural differences among the base material, joint interface, and build part, which influenced friction behavior, wear characteristics, and ductility. These findings provide preliminary insights into the reliability of laser DED repair for remanufacturing applications.
著者関連情報

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top